LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 2.5] >> Manifold Absolute Pressure (Map) Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure (Map) Sensor Removal/Installation

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Disconnect the MAP sensor connector.
  4. Remove the MAP sensor.
    Fig 1: MAP Sensor, Intake Manifold And Screw With Torque Specification
    G08140781
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals