LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Inspection >> Passenger-Side >> With auto-open/close function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With auto-open/close function

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Connect the negative battery cable.
  5. Measure the voltage at each terminal.
    • If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item(s)" and related wiring harnesses.
      Fig 1: Identifying Power Window Subswitch Harness-Side Connector (With Auto-Open/Close Function)
      G08144367
    • If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
Terminal Signal Name Connected To Measured Condition Voltage (V) Inspection Item (s)
A Power-cut signal Power window main switch Switch the ignition ON and power-cut switch at UNLOCK B+
  • Power window main switch
  • Related wiring harness
B Window open signal Power window motor Door glass opening B+
  • Power window motor
  • Related wiring harnesses
Other 1.0 or less
C Pulse 1 Power window motor Door glass is not in motion 1.0 or 5.0
  • Power window motor
  • Related wiring harnesses
Door glass is in motion Alternates between 1.0 and 5.0
D Power supply P.WIND(D) 30 A fuse Under any condition B+
  • P.WIND(D) 30 A fuse
  • Related wiring harnesses
F Pulse 2 Power window motor Door glass is in motion Alternates between 1.0 and 5.0
  • Power window motor
  • Related wiring harnesses
Door glass is not in motion 1.0 or 5.0
H GND Body ground Under any condition 1.0 or less
  • GND
I Sensor ground Power window motor Under any condition 1.0 or less
  • Power window motor
  • Related wiring harnesses
J Window close signal Power window motor Door glass closing B+
  • Power window motor
  • Related wiring harnesses
Other 1.0 or less
K Power supply Power window motor Switch the ignition ON B+
  • Power window motor
  • Related wiring harnesses
L Communication Power window main switch Terminal used for communication therefore determination based on terminal voltage inspection not possible.
scientia non olet · About LEMON Manuals