Resistance Inspection
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI 3.7 V6] .)
- Remove the CMP sensor connector.
- Measure the resistance between CMP sensor terminals A and B.
- If not within the specification, replace the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
CMP sensor resistance
- 800-1,320 ohms [18-28 °C {65-82 °F}]
- If not within the specification, replace the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)