Customized Function Setting Procedure

CUSTOMIZED FUNCTION SETTING PROCEDURE

Advanced Keyless Entry And Start System

NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)

- Select the "Module Programming".

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters".
- Select "RKE".

4. Select an item name, and then select option.





Keyless Entry Start System

- For the keyless entry system, refer to the control system personalization features setting. Programming and Relearning

Auto Door Lock System

Applied VIN (assumed):

- JM3 ER2W3*A# 300001-300162
- JM3 ER2W5*A# 300001-300162
- JM3 ER2WL*A# 300001-300162
- JM3 ER2WM*A# 300001-300162
- JM3 ER4W3*A# 300001-300162
- JM3 ER4WL*A# 300001-300162



- For the auto door lock system, refer to the control system personalization features setting. Programming and Relearning

Theft-deterrent System

- For the theft-deterrent system, refer to the control system personalization features setting. Programming and Relearning