LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 5 Touring >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Ignition Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Detach the tab A shown in the figure.
    Fig 1: Identifying Ignition Switch Tab A
    G08153496Courtesy of MAZDA MOTORS CORP.
  4. Remove the ignition switch connector.
    Fig 2: Identifying Lock Lever Pulling Direction And Ignition Switch Connector
    G08153497Courtesy of MAZDA MOTORS CORP.
    1. Pull the lock lever in the direction of the arrow shown in the figure and release the lock.
    2. Disconnect the ignition switch connector.
  5. Remove the ignition switch.
    Fig 3: Identifying Ignition Switch And Tab
    G08153498Courtesy of MAZDA MOTORS CORP.
    1. Push the tab shown in the figure.
    2. Remove the ignition switch.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals