LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Main Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Main Switch Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the cover.
    Fig 1: Removing Power Window Main Switch Cover
    G09783875Courtesy of MAZDA MOTORS CORP.
  3. Insert a remover tool shown in the figure and remove the tab A in the direction of arrow (1).
    Fig 2: Sliding Power Window Main Switch
    G09783876Courtesy of MAZDA MOTORS CORP.
  4. Slide the power window main switch in the direction of the arrow (2) shown in the figure and remove the tab B.
  5. Disconnect the power window main switch connector.
  6. Pull the edge of power window main switch cover in the direction of the arrow in the order of (4), (5) while detaching tab C.
    Fig 3: Pulling Edge Of Power Window Main Switch Cover
    G09783877Courtesy of MAZDA MOTORS CORP.
  7. Pull the edge of power window main switch cover in the direction of the arrow in the order of (6), (7) while detaching tab C.
  8. Pull the edge of power window main switch cover in the direction of the arrow in the order of (8), (9) while detaching tab C.
  9. Remove the power window main switch in the direction of the arrow (10) shown in the figure.
  10. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals