LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Center Accessory Socket Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Center Accessory Socket Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the console-up. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the center accessory socket. (See CENTER ACCESSORY SOCKET REMOVAL/INSTALLATION .)
  4. Connect the tester probe to the position shown in the figure and verify that there is continuity.
    • If it cannot be verified, replace the center accessory socket.
      Fig 1: Connecting Tester Probe To Center Accessory Socket And Terminals
      G09784378Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals