Clutch Pedal Position (CPP) Switch Inspection

Verify that the CPP switch is installed properly.
Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
Disconnect the CPP switch connector.
Inspect for continuity between CPP switch terminals A and B.

Fig 1: Inspecting Continuity Between CPP Switch Terminals A And B
Courtesy of MAZDA MOTORS CORP.
- If not as specified, replace the CPP switch.

CLUTCH PEDAL POSITION SPECIFICATION

Measured Condition	Clutch Pedal Position	Continuity
Rod pushed	Clutch pedal released	Continuity detected
Except above	Clutch pedal depressed	No continuity