LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 5 Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Neutral Switch Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Neutral Switch Inspection

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  3. Disconnect the neutral switch connector.
  4. Remove the neutral switch.
  5. Inspect for continuity between neutral switch terminals A and B.
    Fig 1: Inspecting Continuity Between Neutral Switch Terminals A And B
    G08150326Courtesy of MAZDA MOTORS CORP.
    • If not as specified, replace the neutral switch.
    NEUTRAL SWITCH SPECIFICATION

    Measured Condition Continuity
    Rod pushed Continuity detected
    Except above No continuity
scientia non olet · About LEMON Manuals