LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Before Service Precaution >> Fuel Line Safety Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Line Safety Procedure

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  3. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  4. Remove the fuel pump relay.
    G13726713Courtesy of MAZDA MOTORS CORP.
  5. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  6. Start the engine.
  7. After the engine stalls, crank the engine 2-3 times.
  8. Switch the ignition to off.
  9. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  10. Install the fuel pump relay.
scientia non olet · About LEMON Manuals