Fuel Injector Installation Note
- Apply a small amount of clean oil to the fuel injector groove and the new O-ring, and assemble them.
- Temporarily attach a new clip to the fuel injector groove.NOTE:
- When the clip is attached correctly, the central area of the fuel injector and the clip finger positions are aligned.
- Hold the fuel injector firmly and push the clip into the fuel injector until the clip stops sliding.
- Verify that the fuel injector connector position is correct.
- Press the fuel injector into the fuel injector cup. Continue pressing until the clip contacts the lower surface of the fuel injector cup.
- Verify that the fuel injector and clip are correctly installed with the clip locked onto the fuel injector cup notch.