April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Removal/Installation

Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
Disconnect the negative battery cable.
Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
Remove in the order indicated in the table.
Install in the reverse order of removal.

Fig 1: Ignition Coil Components With Torque Specification

G13726834

Courtesy of MAZDA MOTORS CORP.

PART DESCRIPTION

1	Plug hole plate bracket
2	Connector
3	Ignition coil