LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GT, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Inspection >> Visual Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual Inspection

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  4. Disconnect the CMP sensor connector.
  5. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
  6. Verify that there are no metal shavings on the CMP sensor.
    • If there is a malfunction, remove any metal shavings that are adhering.
scientia non olet · About LEMON Manuals