LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Engine Oil Data Reset >> Engine oil data reset procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine oil data reset procedure

Step Inspection Results Action Note
1
  • Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.
  • Is the engine oil maintenance monitor function on?
 Yes Go to the next step. If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.
No The engine oil data reset is unnecessary.
2
  • Switch the ignition ON (engine off) and switch the display using the tripmeter switch to display the odometer.
    CAUTION:
    • The tripmeter and average fuel economy are reset when the following procedures are performed with tripmeter A or B displayed.
  • Switch the ignition OFF (LOCK).
  • Press and hold the tripmeter switch with the ignition switched off, then switch the ignition ON (engine off).
    • Keep pressing the tripmeter switch for more than 5 s  .
  • Does the master warning light flash for a few seconds?
 Yes Engine oil data reset is completed. The master warning light flashes for a few seconds when the engine oil data reset procedure is completed.
No Perform Step 2 again.
scientia non olet · About LEMON Manuals