LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine >> Engine Control System Operation Inspection >> Inspection >> Related PIDs >> Engine Oil Solenoid Valve Control System Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Oil Solenoid Valve Control System Inspection

  1. Connect the M-MDS to the DLC-2.
  2. Perform the KOER self test. (Refer to KOEO/KOER SELF TEST .)
  3. Verify that DTC P06DA:00 is not displayed. (Refer to ON-BOARD DIAGNOSTIC TEST .)
    • If DTC P06DA:00 is displayed, perform the DTC inspection. (Refer to DTC P06DA:00 .)
  4. Inspect the engine oil pressure. (Refer to OIL PRESSURE INSPECTION .)
    • If the engine oil pressure is not as specified, repair or replace the malfunctioning part according to the inspection results:
  5. Access the following PCM PIDs using the M-MDS. (Refer to ON-BOARD DIAGNOSTIC TEST .)
    • OIL_P_SOL
    • RPM
    • ECT
  6. With the engine coolant temperature at 98 °C {208 °F}, increase the engine speed to 4, 000 rpm or higher, and verify that the oil pressure gauge value changes when the data monitor item OIL_P_SOL value is changed from ON to OFF.
    • If the oil pressure gauge value change cannot be verified, inspect the engine oil solenoid valve. (Perform the Engine Oil Solenoid Valve Operation Inspection.) (Refer to ENGINE OIL SOLENOID VALVE INSPECTION .)
scientia non olet · About LEMON Manuals