LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Pcm Removal/Installation >> PCM Connector Connection Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCM Connector Connection Note

CAUTION:
  • Do not touch the PCM connector terminal. The terminal is extremely thin and can be damaged by touching it.
  • If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.
Fig 1: Checking PCM Connector Connection
G10916528Courtesy of MAZDA MOTORS CORP.
  1. Set the PCM connector to the position shown in the figure.
    Fig 2: Setting PCM Connector
    G10916529Courtesy of MAZDA MOTORS CORP.
  2. Align the PCM connector straight against the connection surface.
    Fig 3: Aligning PCM Connector Straight Against Connection Surface
    G10916530Courtesy of MAZDA MOTORS CORP.
  3. Insert the PCM connector straight and press it in until the lever moves up naturally. (Front harness-side connector)
    Fig 4: Inserting PCM Connector
    G10916531Courtesy of MAZDA MOTORS CORP.
  4. Press the PCM connector lever until a click sound is heard.
Fig 5: Pressing PCM Connector Lever
G10916532Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals