On-Board Diagnostic - Blind Spot Monitoring Control Module

• On-Board Diagnostic Wiring Diagram
• Foreword
  • Special Service Tool (SST)
  • Troubleshooting Procedure
  • Action for Non-repeatable Malfunction
• DTC Test
  • CMDTC Self Test
  • ODDTC Self Test
  • Snapshot Data
• Clearing DTC
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC Table
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)
• DTC B118C-11: Blind Spot Monitoring (BSM) Warning Light (LH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118C-15: Blind Spot Monitoring (BSM) Warning Light (LH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118D-11: Blind Spot Monitoring (BSM) Warning Light (RH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118D-15: Blind Spot Monitoring (BSM) Warning Light (RH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U0010-88; U0100-00; U0131-00; U0155-00; U0214-00: Module Communication Error (Ms-Can)
  • Notes
  • Diagnostic Procedure
• DTC U0232-00: Communication Error With Blind Spot Monitoring (BSM) Control Module (LH)
  • Notes
  • Diagnostic Procedure
• DTC U0233-00: Communication Error With Blind Spot Monitoring (BSM) Control Module (RH)
  • Notes
  • Diagnostic Procedure
• DTC U0401-68: Error Signal Received From Pcm
  • Notes
  • Diagnostic Procedure
• DTC U0420-68: Error Signal Received From Electric Power Steering (EPS) Control Module
  • Notes
  • Diagnostic Procedure
• DTC U0423-68: Error Signal Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U0513-68: Error Signal Received From DSC HU/Cm
  • Notes
  • Diagnostic Procedure
• DTC U0515-68: Error Signal Received From Start Stop Unit
  • Notes
  • Diagnostic Procedure
• DTC U2300-54: Configuration Data Not Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-55: Instrument Cluster Configuration Not Implemented
  • Notes
  • Diagnostic Procedure
• DTC U2300-56: Configuration Data Unmatched With Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-64: Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3000-01: Electrical Malfunction Inside Blind Spot Monitoring (BSM) Control Module
  • Notes
  • Diagnostic Procedure
• DTC U3000-09: Blind Spot Monitoring (BSM) Control Module Internal Malfunction
  • Notes
  • Diagnostic Procedure
• Dtc U3000-54: Radar Performance Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3000-97: Radar Performance Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3003-04:Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3003-16: Blind Spot Monitoring (BSM) Control Module Low Power Supply Voltage Input (Less Than 7.321 V)
  • Notes
  • Diagnostic Procedure
• DTC U3003-17: Blind Spot Monitoring (BSM) Control Module High Power Supply Voltage Input
  • Notes
  • Diagnostic Procedure
• PID/Data Monitor Test
• PID/Data Monitor Table
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)
• Active Command Modes Inspection [Blind Spot Monitoring (BSM) Control Control Module]
• Active Command Modes Table
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)