LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Relay And Fuse Block Disassembly/Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relay And Fuse Block Disassembly/Assembly

  1. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.
    Fig 1: Identifying Relay And Fuse Block No. 1 And No. 2 Or Service Hole
    G10950767Courtesy of MAZDA MOTORS CORP.
  2. While pressing the tab of relay and fuse block No. 2 in the direction of the arrow (1) shown in the figure, pull relay and fuse block No. 1 and relay and fuse block No. 2 in the direction of the arrows (2) to detach the tab of relay and fuse block No. 2 from relay and fuse block No. 1.
    Fig 2: Pressing Tab Of Relay And Fuse Block No. 2
    G10950768Courtesy of MAZDA MOTORS CORP.
  3. Detach all tabs of relay and fuse block No. 2 from relay and fuse block No. 1, and remove relay and fuse block No. 1 from relay and fuse block No. 2.
  4. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals