Auto-open/close Function For All Windows: Notes

Disconnect the negative battery terminal. Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the power window subswitch. Refer to POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
Connect the negative battery terminal. Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Connect the power window subswitch connector.
Measure the voltage at each terminal.
- If the voltage is not as specified in the terminal voltage table, inspect the parts under "Inspection item(s)" and related wiring harnesses.
  - If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window subswitch.