LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Inspection >> Intake CMP Sensor >> Visual inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual inspection

CAUTION:
  • When replacing the CMP sensor, make sure there is no foreign matter on it such as metal shavings. If it is installed with foreign matter, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (Refer to PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the intake manifold. (Refer to INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the intake CMP sensor connector.
  5. Remove the intake CMP sensor. (Refer to CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
  6. Verify that there are no metal shavings on the intake CMP sensor.
    • If there is a malfunction, remove any metal shavings that are adhering.
scientia non olet · About LEMON Manuals