Battery Cover Removal Note
CAUTION:
- To prevent component damage, stand at the front of the vehicle and remove the battery cover one side at a time.
- When pulling the clips, do not apply excessive force to a clip using the screwdriver or pair of pliers.
- If excessive force is applied to the clips, they could be damaged. When removing the battery cover, use the following procedure to prevent damaging the clips.
- Remove the battery cover using the following procedure.
- Pull the clip (LH) in the outward direction (approx. 4 mm {0.2 in}) and disengage the battery cover tabs.
- Pull the clip (RH) in the outward direction (approx. 4 mm {0.2 in}) and disengage the battery cover tabs.
- Remove the battery cover.