LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 5 GS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Tank Pressure Sensor Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Tank Pressure Sensor Inspection

NOTE:
  • The fuel tank pressure sensor cannot be removed as a single unit. When replacing the fuel tank pressure sensor, replace it together with the evaporative hose component as a single unit.
  1. Remove the evaporative hose component. (See FUEL TANK REMOVAL/INSTALLATION .)
  2. Switch the ignition to ON.
  3. Plug one end of the evaporative hose component and verify that the output voltage from the fuel tank pressure sensor changes when pressure is applied from the other hose end.
scientia non olet · About LEMON Manuals