LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 5 GS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine Control >> Engine Control System Operation Inspection >> Variable Tumble Control Operation Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Variable Tumble Control Operation Inspection: Notes

  1. Connect the M-MDS to the DLC-2.
  2. Access the ECT PID. (See ON-BOARD DIAGNOSTIC TEST .)
  3. Verify that ECT PID is less than 63°C {145°F}.
  4. Start the engine.
  5. Inspect rod operation under the following conditions:
scientia non olet · About LEMON Manuals