Power Window Main Switch Removal/Installation

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Move the power window main switch component in the direction of the arrow and detach the tabs and hook.

Fig 1: Moving Power Window Main Switch Component
Courtesy of MAZDA MOTORS CORP.
Move the power window main switch component in the direction of the arrow and detach the pin.

Fig 2: Moving Power Window Main Switch Component
Courtesy of MAZDA MOTORS CORP.
Move the power window main switch component in the direction of arrows (1), (2) and detach the tabs.

Fig 3: Moving Power Window Main Switch Component
Courtesy of MAZDA MOTORS CORP.
Disconnect the connectors.

Fig 4: Power Window Main Switch Component From Front Door Trim
Courtesy of MAZDA MOTORS CORP.
Remove the power window main switch component from the front door trim.
Using a tape-wrapped flathead screwdriver, move the power window main switch cover end in the direction of arrow (1) shown in the figure below, and detach the tab while moving the power window main switch in the direction of arrow (2).

Fig 5: Moving Power Window Main Switch Cover End
Courtesy of MAZDA MOTORS CORP.
Detach the tabs in the same manner as Step 7.

Fig 6: Power Window Main Switch, Power Window Main Switch Cover And Tab
Courtesy of MAZDA MOTORS CORP.
Remove the power window main switch from the power window main switch cover.
Install in the reverse order of removal.