Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID TP_UP_TEMP. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and temperature indications for the PID TP_UP_TEMP with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance Inspection .)
Standard
PID TP-UP TEMPERATURE INDICATIONS
| PIDTP_UP_TEMP | |
|---|---|
| V | °C {°F} |
| Approx. 3.57 | 20 {68} |
| Approx. 2.70 | 40 {104} |
| Approx. 1.87 | 60 {140} |