Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID ECT. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and temperature indications for the PID ECT with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance Inspection .)
Standard
VOLTAGE SPECIFICATION
| ECT | |
|---|---|
| V | °C {°F} |
| Approx. 2.65 | 29 {84} |
| Approx. 0.71 | 88 {190} |