LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN M) >> Knock Sensor (KS) Inspection >> Resistance Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection: Notes

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the KS connector.
  5. Remove the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION .)
  6. Measure the resistance between KS terminals A and B.
    Fig 1: Measuring Resistance Between KS Terminals A And B
    G12184634Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals