LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module Removal/Installation >> Brake Pipe Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/Control Module and brake pipe joint referring to the figure.
    Fig 1: DSC HU/Control Module Components
    G11433112Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About LEMON Manuals