Coupling Component Calibration Data Writing
CAUTION:
- If the characteristic value of a new coupling component is not input to the PCM or the characteristic value is input incorrectly after replacing the coupling component, it could result in the following conditions:
- The system does not operate normally.
- A problem with durability of the coupling component occurs.
- After replacing the coupling component, read out the characteristic value of a new coupling component and write it to the PCM.
- Read out the characteristic value of the coupling component from the label or mark shown in the figure.
NOTE:
- The Writing the characteristic value of coupling can be performed using the M-MDS.
- Connect the M-MDS to the DLC-2.
- Perform the Writing the characteristic value of Coupling.
- Perform the Reading the characteristic value of Coupling.