Power Window SUBSWITCH Removal/Installation: Front

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Move the power window subswitch component in the direction of the arrow and detach the tabs and hook.

Fig 1: Moving Power Window Subswitch Component
Courtesy of MAZDA MOTORS CORP.
Move the power window subswitch component in the direction of the arrow and detach the pin.

Fig 2: Moving Power Window Subswitch Component
Courtesy of MAZDA MOTORS CORP.
Move the power window subswitch component in the direction of arrows (1), (2) and detach the tabs.

Fig 3: Moving Power Window Subswitch Component
Courtesy of MAZDA MOTORS CORP.
Disconnect the connectors.

Fig 4: Power Window Subswitch Component From Front Door Trim
Courtesy of MAZDA MOTORS CORP.
Remove the power window subswitch component from the front door trim.
Using a tape-wrapped flathead screwdriver, move the power window subswitch cover end in the direction of arrow (1) shown in the figure below, and detach the tab while moving the power window subswitch in the direction of arrow (2).

Fig 5: Moving Power Window Subswitch Cover End
Courtesy of MAZDA MOTORS CORP.
Detach the tabs in the same manner as Step 7.

Fig 6: Power Window Subswitch, Power Window Subswitch Cover And Tab
Courtesy of MAZDA MOTORS CORP.
Remove the power window subswitch from the power window subswitch cover.
Install in the reverse order of removal.