LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN M) >> Camshaft Position (CMP) Sensor Removal/Installation >> Intake CMP Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake CMP Sensor

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION (VIN M) .)
  3. Disconnect the intake CMP sensor connector.
  4. Remove the intake CMP sensor.
    Fig 1: Intake CMP Sensor And Bolt With Torque Specification
    G12184569Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals