LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not Reusing Windshield

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Front fender molding (See FRONT FENDER MOLDING REMOVAL/INSTALLATION .)
    4. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    5. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    6. Front map light (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)
    7. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION .)
    8. Sensor cover (See SENSOR COVER REMOVAL/INSTALLATION .)
    9. Forward sensing camera (FSC) (with forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    10. Forward sensing camera (FSC) cover (with forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) COVER REMOVAL/INSTALLATION .)
    11. Forward sensing camera (FSC) clip (with forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) CLIP REMOVAL/INSTALLATION .)
    12. Forward sensing camera (FSC) short-cord (with forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) SHORT-CORD REMOVAL/INSTALLATION .)
    13. Rain sensor (with auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION .)
    14. Laser sensor (with laser sensor) (See LASER SENSOR REMOVAL/INSTALLATION .)
    15. Rearview mirror (without auto-dimming rearview mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
    16. Auto-dimming rearview mirror (with auto-dimming rearview mirror) (See AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION .)
  3. Set the headliner out of the way.
  4. Disconnect the windshield wiper deicer connector. (with windshield wiper deicer)
    G12265616Courtesy of MAZDA MOTORS CORP.
  5. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
    G11434776Courtesy of MAZDA MOTORS CORP.
  6. Remove the windshield molding by pulling it outward.
    NOTE:
    • If the windshield molding is difficult to remove, warm the windshield molding using a heat gun.
    G12265618Courtesy of MAZDA MOTORS CORP.
  7. Cut out the sealant all around the glass using a sealant remover.
    G11434784Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • If it is difficult to cut sealant, use piano wire and follow the procedure under "Reusing Windshield".
  8. Remove the windshield.
scientia non olet · About LEMON Manuals