PCM Component Installation Note

Install the PCM component using the following procedure:

Temporarily tighten the bolt shown in the figure.

Courtesy of MAZDA MOTORS CORP.

Tighten the PCM component installation bolts in the order shown in the figure.

Fig 1: PCM Component Installation Bolts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.

Tightening torque

9-10 N-m {92-101 kgf.cm, 80-88 in.lbf}
Install the wiring harness protector and connector.

Fig 2: Wiring Harness Protector Bolts With Torque Specification
Courtesy of MAZDA MOTORS CORP.
Install the ground cable shown in the figure.

Fig 3: Ground Cable Bolts With Torque Specification
Courtesy of MAZDA MOTORS CORP.