PID/DATA Monitor Inspection
- Verify that there is no engine oil leakage.
- If there is any malfunction, repair or replace the malfunctioning part according to the inspection results.
- Inspect the engine oil level. (See ENGINE OIL LEVEL SENSOR REMOVAL/INSTALLATION .)
- Switch the ignition ON (engine off).
- Access the PID/DATA monitor item ENG_OIL_LVL using the M-MDS. (See PID/DATA MONITOR INSPECTION .)
- Verify that the PID ENG_OIL_LVL value and the engine oil amount measured using the dipstick are same.