PID/Data Monitor Table (Position Memory Control Module)

-: Not applicable

PID	Unit/Operation	Data Contents	Module Control Terminal
FTLT_MTR_DN	Off/On	Off: Tilt motor is not operated to down. On: Tilt motor is operated to down.	3D (Tilt motor output (down))
FTLT_MTR_UP	Off/On	Off: Tilt motor is not operated to up. On: Tilt motor is operated to up.	3D (Tilt motor output (up))
FTLT_SW_DN	Off:	Off: Tilt switch is not in down. On: Tilt switch is in down.	2D (Tilt switch input (down))
FTLT_SW_UP	Off/On	Off: Tilt switch is not in up. On: Tilt switch is in up.	2C (Tilt switch input (up))
M_SET_SW	Off/On	Off: Position memory switch SET not presseD On: Position memory switch SET pressed	2K (Set switch input)
MEMORY_SW_1	Off/On	Off: Position memory switch 1 not presseD On: Position memory switch 1 pressed	2L (Memory switch 1 input)
MEMORY_SW_2	Off/On	Off: Position memory switch 2 not presseD On: Position memory switch 2 pressed	2M (Memory switch 2 input)
MEMORY_SW_3	Off/On	NOTE: Displays in the M-MDS but it does not operate.
REC_MTR_BK	Off/On	Off: Recliner motor is not operated to back. On: Recliner motor is operated to back.	3H (Recliner motor output (backward))
REC_MTR_FW	Off/On	Off: Recliner motor is not operated to front. On: Recliner motor is operated to front.	3G (Recliner motor output (forward))
REC_SW_DWN	Off/On	Off: Recliner switch is not in back. Off: Recliner switch is in back.	2H (Recliner switch input (backward))
REC_SW_UP	Off/On	Off: Recliner switch is not in front. On: Recliner switch is in front.	2G (Recliner switch input (forward))
RTLT_MTR_DN	Off/On	Off: Lift motor is not operated to down. On: Lift motor is operated to down	3F (Lift motor output (down))
RTLT_MTR_UP	Off/On	Off: Lift motor is not operated to up. On: Lift motor is operated to up.	3E (Lift motor output (up))
RTLT_SW_DN	Off/On	Off: Lift switch is not in down. On: Lift switch is in down.	2F (Lift switch input (down))
RTLT_SW_UP	Off/On	Off: Lift switch is not in up. On: Lift switch is in up.	2E (Lift switch input (up))
SLIDE_MTR_B	Off/On	Slide motor is not operated to back. On: Slide motor is operated to back.	3B (Slide motor output (backward))
SLIDE_MTR_F	Off/On	Off: Slide motor is not operated to front. On: Slide motor is operated to front.	3A (Slide motor output (forward))
SLIDE_SW_B	Off/On	Off: Slide switch is not in back. On: Slide switch is in back.	2B (Slide switch input (backward))
SLIDE_SW_F	Off/On	Off: Slide switch is not in front. On: Slide switch is in front.	2A (Slide switch input (forward))
VPWR	V	Displays the position memory control module power supply voltage.	1M (Power supply)