LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Security And Locks Personalization Features Setting Procedure >> Advanced Keyless Entry System >> Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

  1. Connect the M-MDS to DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    1. Select the "Module Programming".
    2. Select "Programmable Parameters".
  3. Select menu in the SSU.
  4. Select an item name, and then select option.
M-MDS Display Function Initial Setting Setting Contents Control Unit
Advanced keyless function. (1) The advanced keyless entry system and push button start system functions can be disabled. Enabled. Enabled./Disabled. Start stop unit
Walk Away Lock. The out-of-area (reception area) type auto lock function can be set. OFF OFF/ON Start stop unit
Auto Re-lock Time. The operation start time of the auto re-lock function can be changed. 60 seconds 30 seconds/60 seconds/90 seconds Start stop unit
Lock Beep Volume. The keyless beeper volume can be adjusted. Medium Off/Low/Medium/High Start stop unit
(1) Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.
scientia non olet · About LEMON Manuals