LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN Y) >> Accelerator Pedal Position (App) Sensor Inspection >> Function Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection: Notes

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Display the PIDs APP1 and APP2. (See ON-BOARD DIAGNOSTIC TEST (VINY) .) (See PCM INSPECTION (VIN Y) .)
  4. Compare the voltage and opening angle indications for the PIDs APP1 and APP2 with the standard in the table indicated below.
    • If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)
scientia non olet · About LEMON Manuals