LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Sensor Cover Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Cover Removal/Installation

  1. Pull sensor cover A in the direction of the arrow shown in the figure below, detach tabs A, B and C, and remove sensor cover A from the base.
    Fig 1: Pulling Sensor Cover A
    G12237455Courtesy of MAZDA MOTORS CORP.
  2. Pull sensor cover B in the direction of the arrow shown in the figure below, detach the pins and remove sensor cover B from the base.
    Fig 2: Pulling Sensor Cover B
    G12237456Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals