LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Main Fuse Removal/Installation >> VIN Y
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VIN Y

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Widen the main fuse cover in the direction of arrows (1) shown in the figure below to detach tabs A of the main fuse cover from the main fuse, then lift up the main fuse cover in the direction of arrow (2).
    Fig 1: Lifting Up Main Fuse Cover
    G12237502Courtesy of MAZDA MOTORS CORP.
  3. While pressing tab B of the main fuse cover in the direction of the arrow (3) shown in the figure below, lift up the main fuse cover in the direction of the arrow (4) to detach the tab B of the main fuse cover from the main fuse.
  4. Remove the main fuse cover.
  5. Remove the nuts.
    Fig 2: Main Fuse, Wiring Harness And Nuts With Torque Specification
    G12237503Courtesy of MAZDA MOTORS CORP.
  6. Remove the main fuse.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals