Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID OIL_TEMP. (See ON-BOARD DIAGNOSTIC TEST (VIN Y) .) (See PCM INSPECTION (VIN Y) .)
- Compare the voltage and temperature indications for the PID OIL_TEMP with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance Inspection .)
Standard
PID OIL TEMPERATURE SPECIFICATION
| OIL_TEMP | |
|---|---|
| V | °C {°F} |
| Approx. 3.02 | Approx. 32 {89.6} |
| Approx. 1.1 | Approx. 94 {201.2} |