When not using M-MDS

NOTE:

Depending on the nature of the servicing performed prior to implementing the initialization, a warning light may be illuminated.

Inspect the wheel alignment and the tire pressure. (See FRONT WHEEL ALIGNMENT .) (See REAR WHEEL ALIGNMENT .) (See WHEEL AND TIRE SPECIFICATION .)
- If there is any malfunction, adjust the applicable part.
Position the vehicle on level ground.
Switch the ignition ON (engine off) and wait for 30 s or more.
With your left foot depressing the brake pedal, perform the following procedure within 30 s.
1. Operate the parking brake. (Brake system warning light illuminated)
2. Depress the accelerator pedal fully 2 times.
3. Release the parking brake. (Brake system warning light turns off)
4. Perform the same procedure one more time.
Courtesy of MAZDA MOTORS CORP.
Release your foot from the brake pedal.

After 2 s, verify that the following warning lights/indicator lights turns off after approx. 3 s.

NOTE:

Depending on the nature of the work performed prior to implementing the initialization, a warning light may be illuminated.

Courtesy of MAZDA MOTORS CORP.

Courtesy of MAZDA MOTORS CORP.

Courtesy of MAZDA MOTORS CORP.

Courtesy of MAZDA MOTORS CORP.

WARNING LIGHT/INDICATOR LIGHT DESCRIPTION

No.	Warning light/Indicator light	Name
1	Courtesy of MAZDA MOTORS CORP.	Brake system warning light
2	Courtesy of MAZDA MOTORS CORP.	ABS warning light
3	Courtesy of MAZDA MOTORS CORP.	TCS/DSC indicator light
4	Courtesy of MAZDA MOTORS CORP.	TCS OFF indicator light

NOTE:

If each warning light/indicator light is not illuminated/does not turn off, switch the ignition off and repeat the procedure from the beginning.