Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation: Notes

Replacement Part 

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
2. Lift up the vehicle.
3. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
4. Disconnect the connector for the engine oil temperature sensor/engine oil pressure sensor using the following procedure: (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR CONNECTOR CONNECTION NOTE .)
   1. Pull out the connector lock in the direction of the arrow.

      Courtesy of MAZDA MOTORS CORP.

   2. Press the lock down in the direction of the arrow and disconnect the connector.
5. Remove the engine oil temperature sensor/engine oil pressure sensor.
   Fig 1: Engine Oil Temperature And Pressure Sensor With Torque Specification

   Courtesy of MAZDA MOTORS CORP.
6. Install in the reverse order of removal.