LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-30 Select, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine >> Knocking/Pinging-Acceleration/Cruise (Us) >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knocking/Pinging-Acceleration/Cruise (Us): Notes

KNOCKING/PINGING - ACCELERATION/CRUISE (SKYACTIV-G, US) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item Knocking/Pinging-acceleration/cruise
Description
  • Abnormal combustion occurs under the condition such as the temperature in the combustion chamber is too high resulting in abnormal noise.
  • Knocking sound occurs from the engine compartment during acceleration.
Possible cause
  • Poor fuel quality
    • Fuel RON is not specified
      • Excessive cleaning agents added in fuel
  • Poor connection of KS, wiring harness
  • The following information for calculating ignition timing is incorrect:
    • KS signal
    • ECT sensor No. 1 signal
    • ECT sensor No. 2 signal
    • IAT sensor No. 2 (integrated in MAP sensor) signal
    • MAF sensor signal
      • Air suction in intake-air system
        • MAP sensor signal
  • Combustion temperature is high
    • Cooling system malfunction
    • Carbon accumulation
      • Use of non-genuine spark plug
WARNING:
CAUTION:
  • Disconnecting/connecting the quick release connector without cleaning it may possibly cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
System wiring diagram
  • Not applicable
Connector diagram
  • Not applicable