Using Battery Voltage Method
- Inspect the battery as follows after removing the battery filler caps, checking the water level, and adding water to the appropriate level if needed:
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | Measure the battery positive voltage. | 12 V or more | Go to Step 3. |
| Less than 12 V | Go to the next step. | ||
| 2 | Quick charge for 30 min and recheck voltage. | 12 V or more | Go to the next step. |
| Less than 12 V | Replace the battery. (See BATTERY REMOVAL/INSTALLATION (VIN M) .) (See BATTERY REMOVAL/INSTALLATION (VIN Y) .) |
||
| 3 | Using the battery load tester, apply load current (See
battery load test current) and record battery voltage after 15 s. Is voltage more than the specification? |
Yes | Normal |
| No | Replace the battery. |
Battery load test current
55D23L (60A.h/20HR) : 180 A
80D26L (65A.h/20HR) : 195 A
75D23L (65A.h/20HR) : 195 A
95D31L (80A.h/20HR) : 250 A