Function inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID TP_UP_TEMP. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and temperature indications for the PID TP_UP_TEMP with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See RESISTANCE INSPECTION .)
Standard
RESISTANCE INSPECTIONPID TP_UP_TEMP V °C {°F} Approx. 3.57 20 {68} Approx. 2.70 40 {104} Approx. 1.87 60 {140}