April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off).
Display the PID INLET_PRES. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)

Compare the voltage and boost pressure indications for the PID INLET_PRES with the standard in the table indicated below.

If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)

Standard

VOLTAGE INSPECTION

INLET_PRES		Remarks
V		kPa {kgf/cm² , psi}
Approx. 4.12	101 {1.03, 14.6}	Ignition switched ON (engine off)
Approx. 1.90	33 {0.34, 4.8}	Idle (after warm up)
Approx. 1.23	26 {0.27, 3.8}	Racing (Engine speed: 2, 000 RPM)