Resistance Inspection
NOTE:
- The low fuel pressure sensor/fuel temperature sensor cannot be removed as a single unit. When replacing the low fuel pressure sensor/fuel temperature sensor, replace it together with the high pressure fuel pump as a single unit.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
- Disconnect the low fuel pressure sensor/fuel temperature sensor connector.
- Measure the resistance between low fuel pressure sensor/fuel temperature sensor terminals E and C.
- If not as specified, replace the high pressure fuel pump. (See HIGH PRESSURE FUEL PUMP REMOVAL/INSTALLATION .)
RESISTANCE SPECIFICATIONFuel temperature (°C {°F}) Resistance (Kilohms) -40 {-40} Approx. 44.9 0 {32} Approx. 5.78 25 {77} Approx. 2.04 140 {284} Approx. 0.0719