LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-9 Signature >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Shift Mechanism >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable Adjustment >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Cable Adjustment: Notes

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Selector lever knob (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
    2. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  3. Shift the selector lever to the P position.
  4. Pull out the safety lock in the direction of the arrow (1) shown in the illustration, pull out the lock piece in the direction of the arrow (2) shown in the illustration, and release the lock. (See SELECTOR CABLE (SELECTOR LEVER SIDE) INSTALLATION NOTE .)
    G11441233Courtesy of MAZDA MOTORS CORP.
  5. Set the manual shaft to the P position.
    G13112809Courtesy of MAZDA MOTORS CORP.
  6. Press in the lock piece in the direction of the arrow (1) shown in the illustration, press in the safety lock in the direction of the arrow (2) shown in the illustration, and lock it.
    G11441241Courtesy of MAZDA MOTORS CORP.
  7. Perform the procedure in the reverse order of Step  1 to  5 to install the removed part.
  8. Perform the selector lever inspection. (See SELECTOR LEVER INSPECTION .)
scientia non olet · About LEMON Manuals