PID/Data Monitor Table [Auto Leveling Control Module]
PID/DATA MONITOR DESCRIPTION (AUTO LEVELING CONTROL MODULE)
| PID | Unit/Operation | Data contents | Module control terminal |
|---|---|---|---|
| ACC_SEN_TEMP | °C | Displays acceleration sensor temperature. | - |
| ACC_SEN_TEMP_INIT | °C | Displays acceleration sensor temperature when auto leveling control module is initialized. | - |
| ACC_X | mG | Displays current acceleration value (X-axis). | - |
| ACC_X_INIT | mG | Displays acceleration value (X-axis) when auto leveling control module is initialized. | - |
| ACC_Y | mG | Displays current acceleration value (Y-axis). | - |
| ACC_Y_INIT | mG | Displays acceleration value (Y-axis) when auto leveling control module is initialized. | - |
| ACC_Z | mG | Displays current acceleration value (Z-axis). | - |
| ACC_Z_INIT | mG | Displays acceleration value (X-axis) when auto leveling control module is initialized. | - |
| H/L_STAT | OFF/DRL ON/TNS ON/HeadlightLo ON/HeadlightHi ON |
|
J, I |
| HORZ_STAT | Not horizontally/horizontally | Displays status of horizontal. | - |
| LVL_TGT_ANG | ° (deg) | Displays target angle of leveling control. | E |
| PITCH | ° (deg) | Displays calculated pitch angle. | - |
| VPWR | V | Displays auto leveling control module power supply voltage. | C |
| VSS | km/h | Vehicle speed is displayed. | J, I |