LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> VCM Initial Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VCM Initial Setting

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Activate the M-MDS and perform the following procedure.
    1. Press [Start] to start the vehicle identification.
    2. Press the [Toolbox] tab.
    3. Press the [Work Support] icon.
    4. Press [BRAKES].
    5. Press [Run] for [Calibrating Yaw Rate for VCM].
    6. Confirm the Calibrating Yaw Rate for VCM procedure from Step (7) to Step (10) and press [Next].
    7. Verify that the ignition is switched ON (engine off) and press [Next].
    8. Press [Next] to perform [Calibrating Yaw Rate for VCM].
    9. When the M-MDS processing is completed, press [Next].
    10. Press [Next] to complete [Calibrating Yaw Rate for VCM].
scientia non olet · About LEMON Manuals